Wɔheɔ wɔyeɔ akɛ: Nibii heei ahe nitsumɔ ji wɔsusuma kɛ wɔmumɔ. Nɔ ni nɔ kwɔ ji wɔshihilɛ. Nihɔɔlɔ hiamɔ nii ji wɔ Nyɔŋmɔ kɛha GtmSamrt High Speed ​​Air Pressure Thermoforming Machine HEY01, Koni enine ashɛ nɔ ni yaa nɔ daa, sɛɛnamɔ, kɛ hiɛyaa ni yaa nɔ daa nɔ kɛtsɔ sɛɛnamɔ ni yɔɔ gbeyei ni enine shɛɔ nɔ lɛ nɔ, kɛ sɛɛnamɔ ni akɛfataa wɔ nibii ahe nitsulɔi lɛ kɛ wɔ nitsulɔ lɛ he lɛ ni yaa hiɛ daa lɛ nɔ.
Wɔheɔ wɔyeɔ akɛ: Nibii heei ahe nitsumɔ ji wɔsusuma kɛ wɔmumɔ. Nɔ ni nɔ kwɔ ji wɔshihilɛ. Purchaser hiamɔ nii ji wɔ Nyɔŋmɔ kɛha Niyenii Adeka Feemɔ Mashin Jara, Tsɔne Hee ni Akɛfeɔ Nibii ni Akɛwoɔ La Mli, Plastic Plɛte Feemɔ Mashin He Jara, Thermoforming Mshini Kɛha Yibii Adeka, Wɔ Nitsumɔhe lɛ yɛ tsɔnei ahe nilelɔi kɛ ŋaa nitsulɔi ni baaha osanebimɔi ni kɔɔ tsɔne lɛ saamɔ he naagbai ahe lɛ ahetoo, ekomɛi ji nɔ ni fɔɔ baa. Wɔ nibii lɛ ahe nɔmimaa, jara ni ajieɔ, sanebimɔi fɛɛ ni kɔɔ nibii lɛ ahe lɛ, Esa akɛ onu he oya ni okɛ wɔ agba sane.

PLA tsɔne ni akɛfeɔ la

Thermoforming tsɔne lɛ he saji otii

Ahenɔi	HEY01-6040	01-7860
Max.He ni Afeɔ (mm2)	600×400	780×600
Nitsumɔ He	Feemɔ, Fomɔ, Tomɔ
Nibii ni Akɛtsuɔ Nii	PS, KOoloo, tsitsii, PP, PLA, etsara nɔ
Wolo lɛlɛɛmɔ (mm)	350 kɛyashi 810 lɛ nɔ
Wolo lɛ mli tsiimɔ (mm)	0.2-1.5
Max. Dia. Wolo wolo (mm)	800
Mold Strok feemɔ (mm)	120 kɛha ŋwɛi ŋta kɛ shishi ŋta
Hewalɛ ni Akɛtsuɔ Nii	60-70KW/H
Max. Afee mlibotemɔ (mm)	100
Mold Strok ni afoɔ (mm)	120 kɛha ŋwɛi ŋta kɛ shishi ŋta
Max. He ni Afoɔ (mm2)	600×400	780×600
Max. Mold Gbemɔ Hewalɛ (T)	50
Oyaiyeli (sɛɛkuu/minitii)	Nɔ ni fe fɛɛ 30
Max. Vacuum Pɔmp lɛ Hewalɛ	200 m3/ŋmɛlɛtswaa
Gbɛjianɔtoo ni haa Jɔɔ	Nu ni Heɔ Jɔɔ
Hewalɛ ni akɛhaa	380V 50Hz 3 fã 4 waya
Max. Hewalɛ ni haa dɔɔ (kw)	140
Max. Hewalɛ ni yɔɔ tsɔne muu lɛ fɛɛ mli (kw)	160
Tsɔne lɛ dalɛ (mm)	9000*2200*2690
Wolo ni hiɛɔ lɛ dalɛ (mm)	2100*1800*1550
Mashin muu lɛ fɛɛ tsiimɔ (T)	12.5

Nibii Ahe Hiɛkpamɔ

Enɛ Mashin ni Feɔ La Nibii ni sa: PLA, PP, PS, kooloi kɛ ekrokomɛi.

Nibii ahenɔi: srɔtoi ni fiteɔ plastic adekai, tsɛnsii, tsɛnsii, tsɛnsii, tsɛnsii, tsɛnsii, tsofai kɛ nibii krokomɛi ni akɛwoɔ tsɛnsii amli.

Henii

1. Mɛkanikal, pneumatic kɛ tsɔne ni akɛfee ekome, nitsumɔ nifeemɔi fɛɛ lɛ, PLC kudɔɔ. Touch screen lɛ haa nitsumɔ lɛ feɔ mlɛo ni efeɔ mlɛo.
2. Nɔnyɛɛ Kɛ/Loo Vacuum feemɔ.
3. Mashin ni Feɔ La: Ŋwɛi kɛ shishi ŋmɔtɔ ni feɔ.
4. Servo tsɔne niyenii, niyenii lɛ sɛɛtsɛmɔ baanyɛ atsake step-less. Oyaiyeli ni nɔ kwɔ kɛ nɔ ni ja.
5. Hita ni yɔɔ ŋwɛi kɛ shishi, fãi ejwɛ ni haa hulu tsoɔ.
6. Heater ni yɔɔ nilee mli latsaa nɔkwɛmɔ gbɛjianɔtoo,ni yɔɔ pɛpɛɛpɛfeemɔ ni nɔ kwɔ, latsaa ni yɔɔ ekome, lɛ bɛ hewalɛ kɛtsɔ kponɔgbɛ voltage.Low hewalɛ ni akɛtsuɔ nii (hewalɛ ni akɛtoɔ 15%), kwɛɔ koni latsaa flɔnɔɔ nitsumɔ wala sɛɛ tsɛ.
7. Mɔl feemɔ kɛ efomɔ gbelemɔ kɛ ŋamɔ ni servo tsɔne kudɔɔ, nibii kaneɔ lɛ diɛŋtsɛ.
8. Akɛ nibii lɛ ato shikpɔŋ.
9. Plastic tsɔne ni akɛfeɔ la: data ni akɛwoɔ mɔ yitsoŋ nitsumɔ.
10. Abaanyɛ atsake niyenii ni akɛhaa lɛ mlilɛɛmɔ lɛ yɛ be kome mli loo yɛ ekomefeemɔ mli yɛ tsɔne gbɛ nɔ.
11. Heater lɛ diɛŋtsɛ baatsi-je kpo kɛji wolo lɛ egbe naa.
12. Auto roll wolo lɛ mli nibii, tsi nitsumɔ jatsu lɛ shi.

Nibii Titrii ni yɔɔ mli lɛ ahe gbɛi

PLC	DELTA
Taa Skrin lɛ nɔ	MCGS
Servo Tsɔne	DELTA
Motor ni kɛ ehe kpaaa gbee	TSƆƆMƆ
Frekuensi Tsakemɔ	DELIKSI
Nɔ ni tsɔɔ nii amli	OMDHON
Brikii ni Heɔ La	TSƆƆMƆ
AC Kontakta	CHNT
Tɛmo Relɛi	CHNT
Relay ni yɔɔ teŋgbɛ	CHNT
Relay ni yɔɔ shiŋŋ	CHNT
Solenoid Valv	Kɔɔyɔɔ TAC
Kɔɔyɔɔ Switsi	CHNT
Kɔɔyɔɔ Silinda	Kɔɔyɔɔ TAC
Valve ni Kudɔɔ Nɔnyɛɛ	Kɔɔyɔɔ TAC

Nɔ Hewɔ ni Ohalaa Wɔ – Sɛɛnamɔi ni yɔɔ PLA nibii ni fiteɔ nii ni akɛtsuɔ nii yɛ plastic ni agu lɛ sɛɛ

1. GTMSMART PLA nibii ahe tsabaa kome
2. PLA niyenii ni fiteɔ nii ni akɛwoɔ mli lɛ he mfonirifeemɔ
3. PLA-nibii heei ni kɛ shihilɛ kpãaa gbee ni efiteɔ ni je lɛ kpɛlɛɔ nɔ

• Eco-naanyobɔɔ kɛ nibii ni fiteɔ
• Anti-grease lɛ botemɔ waaa
• Nifeemɔ
• Hewalɛ ni tsiɔ hulutsoo naa

GtmSamrt Kɔɔyɔɔ ni He Wa Oyaiyeli ni Feɔ Latsaa HeY01. Wɔheɔ wɔyeɔ akɛ: Nibii heei ahe nitsumɔ ji wɔsusuma kɛ wɔmumɔ. Nɔ ni nɔ kwɔ ji wɔshihilɛ.

thermoforming tsɔne hee, thermoforming tsɔne kɛha aduawai adeka, plastic plɛte feemɔ tsɔne jara, niyenii adeka feemɔ tsɔne jara, Wɔ Nitsumɔhe lɛ yɛ tsɔnei ahe nilelɔi ni he esa kɛ ŋaa nitsulɔi ni baaha osanebimɔi ni kɔɔ naagbai ahe lɛ ahetoo, ekomɛi ni afɔɔ feemɔ. Wɔ nibii lɛ ahe nɔmimaa, jara ni ajieɔ, sanebimɔi fɛɛ ni kɔɔ nibii lɛ ahe lɛ, Esa akɛ onu he oya ni okɛ wɔ agba sane.

---

Sɛɛbee: OEM/ODM Glass ni Akɛtsuɔ Nii ni Akɛtsuɔ Nii Shikome lɛ He Nitsumɔhe Jara

Tsa nɔ: China nitsumɔhe jara PP Thermoforming tsɔne kɛha strobɛri adeka niyenii tsinsii

---

Niyenii Adeka Feemɔ Mashin Jara

Tsɔne Hee ni Akɛfeɔ Nibii ni Akɛwoɔ La Mli

Plastic Plɛte Feemɔ Mashin He Jara

Thermoforming Mshini Kɛha Yibii Adeka