Vacuum Forming kɛ Pressure Forming He Nibii Amlipɛimɔ Koni Ekɛ Onifeemɔ He Hiamɔ Nii lɛ Akpã gbee

 

Kɛji akɛ oohala thermoforming gbɛ ni sa kɛha plastic tsɛnsii afeemɔ lɛ, srɔtofeemɔ ni yɔɔ vacuum feemɔ kɛ pressure feemɔ teŋ lɛ shishinumɔ he miihia waa. Gbɛi enyɔ lɛ fɛɛ tsakeɔ thermoplastic woji lɛ amɛfeɔ nibii ni tsuɔ nii tamɔ ŋshɔŋlooi atoohei, aduawai atoohei, niyenii ni akɛwoɔ mli, kɛ nitsumɔhei atoohei. Shi kɛlɛ, nyɛmɔi ni yɔɔ srɔto ni amɛyɔɔ, nibii ni akɛtsuɔ nii lɛ kɛ amɛhe kpãa gbee, kɛ bɔ ni amɛkɛtsuɔ nii amɛhaa lɛ haa amɛfeɔ nɔ ni sa jogbaŋŋ kɛha nibii pɔtɛɛ komɛi ni afeɔ lɛ.

 

 

Vacuum Forming: Eyɛ Mlɛo kɛ Etsuɔ Nii Jogbaŋŋ

 

Vacuum feemɔ, ni atsɛɔ lɛ hu akɛ thermoforming loo vacuum molding lɛ biɔ ni akɛ tsɔne ni akɛwoɔ tsɔne mli lɛ awo la mli kɛyashi ebaafee ŋmɔlɔŋmɔlɔ, ni no sɛɛ lɛ akɛ tsɔne ni akɛwoɔ tsɔne mli lɛ mli hewalɛ afee lɛ. Nifeemɔ lɛ jeɔ shishi kɛtsɔ wolo ni mli edɔ lɛ ni akɛwoɔ tsɔne ko nɔ lɛ nɔ. No sɛɛ lɛ, tsɔne ko ni haa kɔɔyɔɔ bɛ mli lɛ jieɔ kɔɔyɔɔ ni yɔɔ wolo lɛ kɛ tsɔne lɛ teŋ lɛ, ni egbalaa nibii lɛ kɛyaa bɔ ni ataoɔ lɛ mli. Kɛji edɔ lɛ, afoɔ plastic ni afee lɛ mli kɛyaa naagbee tsɔɔmɔi lɛ anɔ.

 

Nibii titrii ni kɔɔ Vacuum feemɔ he:

Nibii ni Akɛwoɔ Mli: Ekɛ PET, PS, PVC, kɛ tsɔnei krokomɛi ni haa hulu tsoɔ lɛ tsuɔ nii.

Nibii ni akɛtsuɔ nii: Ehi jogbaŋŋ kɛha nibii ni tsiimɔ waaa, ni yɔɔ ŋwɛi ŋta kome tamɔ ŋtayaai ni akɛwoɔ ŋtayaai amli, ŋtayaai ni akɛwoɔ ŋtayaai amli, kɛ ŋtayaai ni akɛwoɔ aduawai amli ni mli ekɔɔɔ mli lɛ afeemɔ.

 

Sɛɛnamɔi:

Nibii ni akɛtsuɔ nii lɛ ahe nyɔmɔwoo ni baa shi yɛ tsɔnei ni yɔɔ mlɛo lɛ ahewɔ.

Be ni yaa oya kɛha nibii babaoo afeemɔ.

Hewalɛ nitsumɔ ni fiteɔ nii fioo pɛ.

 

Naatsii:

Fitsofitso yiŋkpɛɛ fioo kɛ akɛto nɔnyɛɛ feemɔ he.

Gbogboi ni mli tseee lɛ baanyɛ aha tsɔne lɛ mli hewalɛ afee mlɛo.

 

Nɛkɛ gbɛ nɛɛ ji nɔ ni mɛi babaoo sumɔɔ kɛha nitsumɔi ni kɛ shika helɛtemɔ kɛ tsakemɔ oya baa hiɛ, titri lɛ be mli ni ehe ehiaaa ni afee nɔ ko ni mli wa loo nɔ ko ni mli kwɔ.

Nɔnyɛɛ ni Feɔ: Pɛpɛɛpɛ kɛ Be ni Ehiɔ Shi

 

Nɔnyɛɛ ni feɔ etswaa vacuum feemɔ gbɛ lɛ emaa shi kɛtsɔ kɔɔyɔɔ ni mli edɔ ni ekɛwoɔ plastic wolo ni mli edɔ lɛ nɔ lɛ nɔ. Nɛkɛ gbɛjianɔtoo ni haa hewalɛi enyɔ yɔɔ mli nɛɛ (vacuum ni yɔɔ shishi kɛ kɔɔyɔɔ ni yɔɔ ŋwɛi) lɛ nyɛɔ nibii lɛ anɔ koni ekɛ ŋmɔtɔ lɛ abɔ he waa, ni emɔɔ nibii bibii ni yɔɔ mli lɛ amli fitsofitso ni enáa ŋwɛigbɛi ni yɔɔ ŋmɔlɔŋmɔlɔ.

 

Nibii Titrii ni Kɔɔ Nɔnyɛɛ Feemɔ He:

Nibii ni Akɛtsuɔ Nii: Ekɛ PP, PS, PLA, PET, kɛ nibii ni wala yɔɔ mli ni fiteɔ tamɔ PLA lɛ kpãa gbee.

Nitsumɔi: Ehi kɛha geometrii ni mli wa, ŋwɛi nibii ni yɔɔ ŋmɔlɔŋmɔlɔ, kɛ nibii ni tsii ni biɔ ni ahi shi be babaoo, tamɔ nitsumɔhei nibii ni akɛwoɔ mli loo niyenii ni akɛwoɔ mli ni akɛtsuɔ nii ekoŋŋ.

 

Sɛɛnamɔi:

Hiɛ nɔ naagbee ni hi jogbaŋŋ kɛ henɔi ni yɔɔ diɛŋtsɛ (nɔkwɛmɔnɔ, tso ŋmaa, hewolo).

Gbogbo lɛ mlilɛɛmɔ ni yaa nɔ daa kɛ emuuyeli ni yaa hiɛ.

Eŋmɛɔ draw ni mli kwɔ kɛ undercuts gbɛ.

 

Naatsii:

Tooling jara ni nɔ kwɔ yɛ molds ni awo mli hewalɛ hewɔ.

Be ni sɛɛ tsɛɔ fioo kɛ akɛto vacuum feemɔ he.

Nɔnyɛɛ ni afeɔ lɛ ji nɔ ni mɛi ni feɔ nibii ni he hiaa waa loo nibii ni tsuɔ nii ni nyɛɔ amɛtsuɔ nii shii abɔ loo shihilɛi ni mli wawai lɛ halaa.

Halamɔ ni yɔɔ Vacuum Feemɔ kɛ Pressure Feemɔ Teŋ

 

Kɛji ootao ole gbɛ ni kɛ onitsumɔ lɛ kpãa gbee lɛ, susumɔ nibii ni nyiɛ sɛɛ nɛɛ ahe:

 

1. Bɔ ni afee lɛ mli wa ha:

Vacuum feemɔ sa henɔi ni yɔɔ mlɛo, ni mli ekwɔɔɔ.

Nɔnyɛɛ feemɔ hi fe fɛɛ kɛha henɔi ni mli wawai kɛ naagbee ni yɔɔ ŋmɔlɔŋmɔlɔ.

 

2. Nibii ni He Hiaa:

PLA kɛ PP lɛ tsuɔ nii jogbaŋŋ kɛtsɔ nɔnyɛɛ ni afeɔ lɛ nɔ yɛ amɛ shwiemɔ hei ni nɔ kwɔ lɛ hewɔ.

PET kɛ PVC tsuɔ nii jogbaŋŋ yɛ nifeemɔi enyɔ lɛ fɛɛ mli shi amɛbaanyɛ amɛná saji fitsofitso ni hi jogbaŋŋ yɛ nɔnyɛɛ shishi.

 

3. Nifeemɔ Yibɔ:

Vacuum feemɔ ji nɔ ni jara waaa kɛha nibii babaoo ni ato he gbɛjianɔ lɛ.

Nɔnyɛɛ ni baa lɛ haa ejara ni nɔ kwɔ ni akɛwoɔ hiɛ kɛha nibii ni hi jogbaŋŋ loo nibii ni afee lɛ diɛŋtsɛ lɛ ja.

 

4. Shika He Saji:

Halamɔ vacuum forming kɛji akɛ shishijee shika ni akɛwoɔ mli lɛ nɔtsemɔ ji nɔ ni he hiaa fe fɛɛ.

Halamɔ nɔnyɛɛ ni feɔ kɛha nitsumɔi ni heɔ be kakadaŋŋ ni biɔ shihilɛ ni sɛɛ tsɛɔ kɛ fɛoyeli ni asaa.

 

Naagbee Nibii ni Asusuɔ He

 

Vacuum kɛ pressure forming fɛɛ haa sɛɛnamɔi srɔtoi ni damɔ otii ni okɛma ohiɛ yɛ nibii ahe lɛ nɔ. Vacuum forming haa oyaiyeli kɛ shika ni anyɛɔ aheɔ kɛha nibii ni afee lɛ tɛ̃ɛ, yɛ be mli ni pressure forming haa nɔ ni he hiaa pɛpɛɛpɛ kɛha nibii ni mli wawai ni hi jogbaŋŋ lɛ. Kɛtsɔ nibii ni ohalaa, bɔ ni afee lɛ aha, kɛ bɔ ni afee lɛ aha lɛ mlipɛimɔ nɔ lɛ, obaanyɛ ohala gbɛ ni haa etsuɔ ​​nii jogbaŋŋ, ejara wa, ni etsuɔ ​​nii jogbaŋŋ kɛha nibii ni okɛtsuɔ nii lɛ ahe hiamɔ nii.